|
Easy Brackets are
an innovative two (2) point docking system that allows the quick and
easy installation and removal of saddlebags. Easy Brackets use two (2)
existing bolts holes in the fender rail of the motorcycle. By replacing
the existing bolts with the docking posts and longer bolts provided in
each kit, the Easy Brackets can then be instantly installed and locked
into place.
Because we make
our Easy Brackets specifically for your Harley Davidson model, you will
receive all of the correct hardware with your order. The docking posts
and bolts are especially designed to work perfectly with your Harley
Davidson motorcycle, eliminating the hassles of adding spacing washers
to either line up the docking posts or to achieve a good, tight fit.
All models are
$154.95 per set (both sides) and includes all necessary hardware. For
product details, see our 'About' page
or our Product Diagram.
Please note, when you purchase 1 set of Easy
Brackets the kit includes both the left and right side brackets and all
required mounting hardware.
If you want to
convert your saddlebags on your Yamaha to an easy-to-carry piece of
luggage, be sure to check out our Easy-Tote system.
It's a single strap with special docking posts that connect together
the saddlebags when they're off the motorcycle, making them easy to
carry.
| Yamaha Royal Star & Road Star |
|
 |
YMA-R2 |
Royal
Star & Road Star 1600 or 1700: The docking
posts attach to the two mounting holes in the fender rail. This model
will not work with the Silverado.
|
|
YMA-R2BR |
Royal Star
& Road Star 1600 or 1700 with Backrest: This is
the same bracket as the YMA-R2 but comes with different hardware. The
docking posts mount outside the backrest. The backrest is not provided
and must be purchased separately. This model will not work with the
Silverado backrest.
|
| Yamaha Roadliner |
|
YMA-R3 |
Roadliner:
The docking posts attach
to the two mounting holes in the fender rail |
|
YMA-R3BR |
Roadliner with
Backrest: This is the same backrest as the YMA-R3 but
comes with different hardware. The docking posts mount outside the
backrest. The backrest is not provided and must be purchased separately.
|
| Yamaha Warrior |
|
WAR-R1 |
Warrior: The
docking posts attach to the two mounting holes in the fender rail. NOTE:
The stock exhaust should be replaced to provide adequate clearance for
standard size saddlebags.
|
| Yamaha V-Star 1100 Classic &
1100 Custom |
|
| |
YMA-R1
|
Fits
Yamaha V-Star 1100 Classic & Custom (not for 650's). Attaches
to the two (2) existing bolt holes in the fender rail. If you have a
backrest, use kit YMA-R1BR |
|
YMA-R1BR |
Fits
V-Star 1100 Classic & Custom (not for 650's) with backrests.
Attaches to the two (2) existing bolt holes in the fender rail. |
| Yamaha V-Star 650 Classic &
Custom |
|
|
Y650-CL |
V-Star 650 Classic:
The docking posts attach to the two mounting holes in the fender rail.
|
|
Y650-CU
|
V-Star 650 Custom:
The docking posts attach to the two mounting holes in the fender rail. NOTE:
The turn signal may need to be relocated depending on the size of the
saddlebag used.
Turn signal relocation kits
available if needed
|
|
|
| |
|
Sorry,
we do not make a bracket for any of the Yamaha Virago models. |
•• Choose Your Bike
••
Harley
• Honda
• Indian
• Kawasaki
• Polaris
• Suzuki
• Triumph
• Yamaha
• Excelsior
Henderson
|
