Honda Bolt-On Saddlebag Support Systems

Easy Brackets are an innovative two (2) point docking system that allows the quick and easy installation and removal of saddlebags. Easy Brackets use two (2) existing bolts holes in the fender rail of the motorcycle. By replacing the existing bolts with the docking posts and longer bolts provided in each kit, the Easy Brackets can then be instantly installed and locked into place.

Because we make our Easy Brackets specifically for your Harley Davidson model, you will receive all of the correct hardware with your order. The docking posts and bolts are especially designed to work perfectly with your Harley Davidson motorcycle, eliminating the hassles of adding spacing washers to either line up the docking posts or to achieve a good, tight fit.

All models are $154.95 per set (both sides) and includes all necessary hardware. For product details, see our 'About' page or our Product Diagram.

Please note, when you purchase 1 set of Easy Brackets the kit includes both the left and right side brackets and all required mounting hardware.

If you want to convert your saddlebags on your Honda to an easy-to-carry piece of luggage, be sure to check out our Easy-Tote system. It's a single strap with special docking posts that connect together the saddlebags when they're off the motorcycle, making them easy to carry.  

Honda Shadow
	ACE-R1	ACE 750:  The docking points attach to the forward two mounting holes in the fender rail.
	ARO-R2	AERO 750:  The docking posts attach to two rear mounting holes in the fender rail.
	ARO-R2BR	AERO 750 with Backrest:  This model comes with longer bolts.
	ARO-R1	SHADOW 1100:  The docking posts attach to two rear mounting holes in the fender rail.
	SABR-R1	SABRE 100:  The docking posts attach to two rear mounting holes in the fender rail.
	SABR-R2BR	SABRE 100 with Backrest:  This model comes with longer bolts.
Honda Magna
	MGA-R1	MAGNA:  The docking posts attach to the two mounting holes in the fender rail.
	MGA-R2BR	MAGNA with Backrest:  This model comes with longer bolts.
Honda Valkyrie
	VKE-R1	VALKYRIE:  The docking posts attach to the two mounting holes in the fender rail.
Honda VTX                 VTX-1300C & 1800C models                                   VTX 1300R & 1800R Models                 VTX-1800F Model                                                     VTX 1800N. Model                 VTX-1300S Model
	VTX-C1	VTX-1300C & 1800C Models & 1800S Models:  The docking posts attach to two rear mounting holes in the fender rail.  Note:  This model is used for motorcyles without backrest or luggage rack.
	VTX-C1BR	VTX-C Model with Hondaline Deluxe Backrest ONLY:  See attached drawing for ordering instructions.  This model is used on the 1800 VTX-C model with Hondaline backrest.  Backrest not provided, must be purchased separately.    The docking posts attach to the backrest.  This kit comes with a special mounting plate for installation on the backrest.
	VTX-C1BR-1	VTX-C Model with Hondaline Deluxe Backrest ONLY:  See attached drawing for ordering instructions.  This model is used on the 1800 VTX-C model with Hondaline backrest.  Backrest not provided, must be purchased separately.    The docking posts attach to the backrest.  This kit comes with a special mounting plate for installation on the backrest.
	VTX-C1CBR	1300 & 1800C Model & 1800F Model with Cobra Backrest Only:  Backrest not provided, must be purchased separately.
	VTX-C1CBR	1300 & 1800C Model & 1800F Model with Paladin Backrest Only:  Backrest not provided, must be purchased separately.
	VTX-R2	VTX-Retro &  Neo-Retro Models:  The docking posts attach to two rear mounting holes in the fender rail.  Note:  This model used for motorcycles without backrest or luggage rack.
	VTX-R2BR	1800 & 1300 VTX-Retro with Hondaline & Hondaline Deluxe Backrest:  This model is used on the 1800 and 1300 VTX-Retro Modesl with a Hondaline Backest.  Will not work with the Neo-Retro backrest.  Backrest is not provided, must be puchased separately.  The front docking post attaches outside the backrest and the rear docking post attaches to the rear vacant fender bolt hole.
	VTX-R2PDB	VTX-Retro with Paladin Backrest:  This model is used on the 1800 & 1300 R, N & S Models with a Paladin backrest.  Backrest and hardware not provided, must be purchased separately.
	VTX-R2CBR	VTX-Retro with Cobra Backrest:  VTX-Retro with Cobra Backrest.  This model is used on 1300 and 1800R, N & S models with Cobra Backrest only.  Backrest not provided, must be purchased separately.

•• Choose Your Bike ••

Harley • Honda • Indian • Kawasaki • Polaris • Suzuki • Triumph • Yamaha  

•  Excelsior Henderson