|
Easy Brackets are
an innovative two (2) point docking system that allows the quick and
easy installation and removal of saddlebags. Easy Brackets use two (2)
existing bolts holes in the fender rail of the motorcycle. By replacing
the existing bolts with the docking posts and longer bolts provided in
each kit, the Easy Brackets can then be instantly installed and locked
into place.
Because we make
our Easy Brackets specifically for your Harley Davidson model, you will
receive all of the correct hardware with your order. The docking posts
and bolts are especially designed to work perfectly with your Harley
Davidson motorcycle, eliminating the hassles of adding spacing washers
to either line up the docking posts or to achieve a good, tight fit.
All models are
$154.95 per set (both sides) and includes all necessary hardware. For
product details, see our 'About' page
or our Product Diagram.
Please note, when you purchase 1 set of Easy
Brackets the kit includes both the left and right side brackets and all
required mounting hardware.
If you want to
convert your saddlebags on your Harley Davidson to an easy-to-carry
piece of luggage, be sure to check out our Easy-Tote system.
It's a single strap with special docking posts that connect together
the saddlebags when they're off the motorcycle, making them easy to
carry.
Click Here for HD
Light Relocation Kit
SOFTAILS
FXST/FXSTI Softail Standard
FXSTB/FXSTBI Night Train
FXSTS/FXSTSI Springer Softail
FXSTC 2007 Softail Custom
FLSTF/FLSTFI Fat Boy
FLSTN/FLSTNI Softail Deluxe, Heritage Nostaliga
&
Heritage Special Note: The Softail Deluxe works
with ST-L1,
ST-L1HB, ST-L1DB and
ST-L1SDDB
FLSTS/FLSTSI Heritage Springer (Does
not fit factory saddlebags)
FXSTD/FXSTD1 Deuce
|
|
 |
ST-R1 |
This model is used on all
softail models except the 2006 & later FXST, FXSTB and FXSTS,
2007 FLSTF (see ST-R2) & 2007 FXSTC (see ST-R3HB). The
docking posts attach to the front two mounting holes in the fender
rail. (6 1/4" apart). May only be used with small to medium saddlebags
to avoid relocation of turn signals. If turn signals are to be
relocated see ST-L1.
|
|
ST-R1HB |
This
model is used on all softail models except the 2006 & later
FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see
ST-R3HB). This is the same bracket as the ST-R1 but
comes with different hardware. The docking posts mount outside the
backrest. The backrest is not provided and must be
purchased seperately.
|
|
ST-R1DB |
This
model is used on all softail models except the 2006 & later
FXST, FXSTB and FXSTS, 2007 FLSTF (see ST-R2) & 2007 FXSTC (see
ST-R3HB). This is the same bracket as the ST-R1 but
comes with different hardware. The docking posts mount outside the
detachable hardware. The detachable hardware is not
provided and must be puchased seperately.
|
|
ST-R3HB |
This model is used
on the 2007 FXSTC, Softail Custom. The docking posts
attach to the front two mounting holes in the fender rail outside the
backrest. (5 5/8” apart) May only be used with
small to medium saddlebags to avoid relocation of turn
signals. If turn signals are to be relocated see
ST-L1. If the stock backrest is
replaced with the detachable backrest use ST-R2DB.
|
|
ST-L1 |
Not used with factory Heritage
saddlebags. See HRT Models. This model is used on all softail models.
The docking posts attach to the rear two mounting holes in the fender
rail (9 1/4" apart). Turn signals must be relocated off the fender to
use all ST-L1 models. Turn signal relocation kits
available
|
|
ST-L1DB
|
All Softails with Detachable
Backrest. Will work with Softail Deluxe with Standard Detachable
Backrest. This is the same bracket as the ST-L1 but comes with
different hardware. The docking posts mount outside the detachable
hardware. The detachable hardware is not provided and must be purchased
seperately.
|
|
ST-L1HB
|
All Softails with Hardmount
Backrest. This is the same bracket as the ST-L1 but comes with longer
mounting bolts. The backrest is not provided and must be
purchased separately.
|
|
ST-L1SDDB
|
FLSTN: Softail Deluxe with New
Deluxe Detachable Backrest. This is the same bracket as the ST-L1 but
comes with different hardware. The backrest is not
provided and must be purchased seperately.
|
|
ST-R2
|
Used on 2006 FXST, FXSTB and
FXSTS and 2007 FLSTF models.
The docking posts attach to the front two mounting holes in the fender
rail. (5 5/8" apart). May only be used with small to medium saddlebags
to avoid relocation of turn signals. If turn signals are to be
relocated see ST-L1.
|
|
ST-R2HB
|
Used on 2006 FXST, FXSTB and
FXSTS and 2007 FLSTF models
ith Hardmount Backrest. This is the same bracket as the ST-R2 but comes
with different hardware. The docking posts mount outside the backrest. The
backrest is not provided and must be purchased separately.
|
|
ST-R2DB
|
Used on 2006 FXST, FXSTB and
FXSTS and 2007 FLSTF models
with Detachable Backrest. This is the same bracket as the ST-R2 but
comes with different hardware.
|
|
|
More HD Easy Brackets
•• Choose Your Bike
••
Harley
• Honda
• Indian
• Kawasaki
• Polaris
• Suzuki
• Triumph
• Yamaha
• Excelsior
Henderson
|
